Pro-Ject

Pro-Ject Boasts High-End, Lively + Detailed Sonics and an Exquisite Acrylic Plinth with the XA B Turntable

• Pre-adjusted Pick it Pro Balanced MM cartridge
• Precision 3.7 lb Aluminum platter with TPE damping
• Premium 10“ one-piece Aluminum Carbon fiber armtube for precise, accurate tracking
• Acoustically inert transparent acrylic chassis
• Handmade in Europe

A Clear View

For over 30 years Pro-Ject has designed & built turntables that focus on sound quality over convenience-oriented features, but that hasn't stopped them from experimenting with materials that vary in their resonance properties.

Acrylic has been in their repertoire for decades. Pro-Ject's first ever acrylic turntable was the Pro-Ject 6.9 Perspective, and it was a huge success. 6PerspeX variants have been around for 15+ years too, not to mention a host of 2Xperience variants in acrylic. Needless to say, the limited run of their Perspective Final Edition turntable sold out swiftly as well.

They take pride in how these turntables take advantage of both the aesthetic & sonic values of acrylic in hi-fi, but using acrylic in manufacturing is not as easy as you might think. True, it's anti-resonant, but the rest of the turntable must also lend itself to the sonic equation. Measurement & critical listening reveal that acrylic can actually over-damp sonics if it's not used thoughtfully. XA B uses an Aluminum tonearm & platter, the Pick it PRO Balanced cartridge & purpose-selected isolation feet to render music in a lively, dynamic & detail-rich manner... an experience that becomes doubly immersive when you decide to take the plunge into the world of balanced phono.

Premium Armtube

The XA B turntable features a premium 10“ one-piece Aluminum armtube. The single piece tube heightens rigidity while the 10" length widens the tonearm's arc, reducing tracing error. The low-friction 4-pinpoint cardanic bearing assembly guarantees precise, stable & accurate tracking. They have selected the Aluminum armtube over carbon fiber for its sonic merits when paired with the resonant frequency of the acrylic plinth.

The tonearm also offers audiophiles full control over their adjustment parameters for fine-tuning of VTA & azimuth, encouraging various cartridges and/or record mats to achieve their desired sonics. VTA & azimuth are crucial adjustments in the scheme of cartridge performance & demand evaluation.

Pick it PRO Balanced

The Pro-Ject Pick it PRO Balanced cartridge allows for "True Balanced" signal transmission. A revised version of the Pick it PRO re-routes the grounding so that it sends a symmetrical signal. The big advantage of a balanced connection is its ability to remove accrued noise and interference from the transmission line.

Additionally, Pro-Ject's "True Balanced" cable range offers several options for connecting your XA B to the Phono Box S3 B, Phono Box DS3 B or the Tube Box DS3 B phono stages.

TPE-Damped Die-Cast Platter

The 3.75 lb die-cast Aluminum platter is precision balanced with additional machining after casting. This facilitates perfect platter rotation while playing records. The heavy Aluminum platter also adds a TPE (thermoplastic elastomer) damping ring & corresponding cutout on the underside, muting any resonance created by the metal record platter and contributing to the flywheel effect.

High-Quality RCA Cables

Cables cannot add any information back to a given signal. Rather, they're responsible for allowing as much musical information as possible through to the receiving device. This is why Pro-Ject included the Connect it Phono E 5P > RCA cable. Optimized for phono applications, they have implemented quality metals & careful configuration to ensure lossless signal transmission.

Damped, Height-Adjustable Feet

The XA B stands on (x3) damped & height-adjustable feet for excellent isolation. By using 3 feet they are able to increase stability on uneven surfaces for optimal leveling - a critical setup parameter in terms of maximizing the performance of a tonearm & cartridge.

Sophisticated DC/AC Power Generator

Pro-Ject's turntables use switch-mode power supplies for good reason. They take the unrefined AC power from your wall and convert it to DC. That DC power is then fed to DC/AC generator within the turntable, which in turn powers the AC motor. The advantage is that a completely new sine wave is created by the generator, fully decoupling your turntable from the dirty AC power coming from your outlet. This amounts to steady power being fed to the motor thereby enhancing speed stability.

Two Upgrades in One Box

Clean & stable power is critical for phono setups. The included power supply is a great starting point but you can take it further.

Power Box S3 Phono provides power for the XA B as well as your Pro-Ject phono stage (18V). Its two outputs are specifically engineered to power Pro-Ject turntables and phono preamps simultaneously. The sophisticated DC filtration can have a dramatic impact on overall sound quality.

In addition to the sonic improvements, Power Box S3 Phono also offers users a cleaner cable solution (only one wall-wart needed for the PSU).

Specifications

General

• Weight: 17.64 lbs
• Dimensions: 18.11" x 5.12" x 13.39"
  
• Pro-Ject 2 Year Warranty

Turntable

• Speeds: 33/45rpm (electronic speed change)
• Isolation feet: TPE damped Aluminum, height adjustable
• Platter: 300mm die-cast Aluminum platter w/ TPE damping
• Platter bearing: Stainless steel axle in brass bushing
• Speed drift 33: ±0.30% | 45: ± 0.20%
• Wow & flutter 33: ±0.13% | 45: ± 0.12%
• Tonearm: 10″ one-piece Aluminum armtube
• Effective arm length/mass: 254mm/10g
• Power supply: 15V/0.8A DC
• Power consumption: 5W (0.3W standby mode)
• Cartridge: Pick it PRO Balanced

In the Box

• XA B turntable
• Pick it Pro Balanced MM cartridge
• Record Puck E
• Dustcover + felt mat
• Connect it E 5P-RCA 4' phono cable

Experience World Class Analog Audio with the X8 Evolution with Sumiko Moonstone Cartridge

• The best in precision cut components, using the finest materials, handmade in Europe
• Belt Drive Turntable with electronic speed control
• Premium damping to eliminate vibration and provide a clean, accurate presentation of the finest details

Audiophile Implementations

The X8 turntable is a true high-end solution with major technical features adapted from the Xtension 9 and 10. The precision balanced platter is machined out of a single piece of aluminum and damped with a TPE (Thermo Plastic Elastomer) insert. The platter rotates on an inverted bearing with ceramic ball and PTFE thrust pad. To decrease the load on the bearing, an opposing neodymium magnet repels the platter from the plinth and bearing, ensuring smooth and quiet operation for decades to come.

The massive MDF chassis is supported by custom feet which are are CNC machined out of aluminum and are fully height-adjustable. They utilize TPE damping technology, very effectively decoupling the X8 from the surface it is placed on.

The combination of mass and damping provide a very stable system, isolating the stylus from both airborne and structural vibrations, without being finicky to setup and remains stable and properly aligned over time. You hear your music, not the turntable.

The 9cc EVO carbon tonearm utilizes inverted cardanic tonearm bearings, has four stainless steel tips mounted in ABEC 7 quality ball bearings mounted in a C-shaped section to minimize resonances. The low mass one-piece carbon fiber tonearm tube is crafted in a conical shape to minimize standing wave vibrations. The tonearm wire loom is one piece, from the cartridge to the 5pin DIN output, designed to allow either single ended or True Balanced phono connection.

Sumiko Stylus Replacement & A Unique Tour of the MM Design

Sumiko Phono Cartridges pair well with Pro-Ject tonearms. Their sonic synergy delivers non-fatiguing music that can be enjoyed for hours with no sacrifice to low-level detail & resolution- the things that make our music reproduction spring to life! Upgrading your stylus is an easy, low-risk path to immediate, audible improvement in your analog experience that only improve with break-in. Cartridge/stylus break-in occurs progressively as you listen. Our listeners notice the greatest degree of improvement in the 20-50 hour range.

True Balanced – Get Blown Away

Setting us apart from the competition, all Pro-Ject turntables are configured for balanced operation.* Switching to balanced is no subtle upgrade and promises to redefine ‘reference’ sound quality in your turntable system. What’s needed to get there are a) a moving coil cartridge, b) a turntable with balanced phono outputs, c) a phono preamp with balanced phono inputs and d) a balanced cable carrying the phono signal from turntable to phono preamp. Typically a much more costly endeavor, Pro-Ject has changed that landscape by offering products that make the technology attainable to any serious listener.

X8 Evolution comes equipped with a balanced 5-pin DIN phono output and can be run balanced with either DIN > XLR or DIN > mini XLR phono cables and a balanced phono stage. The turntable ships with a DIN > RCA phono cable for maximum compatibility out of the box (unbalanced dual single-ended RCA/ground is by far the most common connection type in phono). Balanced add-ons are sold separately.

Specifications

General

• Weight: 33 lbs
• Dimensions: 18.3" x 13.8" x 5.9"
• X8 Full User Manual
• Pro-Ject 2 Year Warranty

Turntable

• Speeds: 33/45rpm (electronic speed change)
• Isolation feet: TPE damped aluminum, height adjustable
• Platter: 5.1kg lathed aluminum
• Platter bearing: inverted ceramic ball, magnetic support
• Speed drift 33: ±0.11%; 45: ± 0.09%
• Wow & flutter 33: ±0.11%; 45: ± 0.10%
• Rumble: 73dB
• Tonearm: 9″ one-piece carbon-fiber tonearm
• Effective arm length/mass: 9″(230mm)/8.5g
• Overhang: 18mm
• Power supply: 15V/0.8A DC
• Power consumption: 5W (0.3W standby mode)
• Cartridge: Superpack (Sumiko Moonstone)

In the Box

• Dustcover
• 45rpm adapter
• Felt mat
• Included phono cable: Connect it E 5P-RCA, 1.23m

The VC-S3 is Pro-Ject’s Latest Premium Vacuum-based Record Cleaner with New Features

• Improved cabinet design and high-end build quality
• Magnetic clamp, super-fast, super-strong cleaning
• Completely dry records within 2 rotations
• Removes static load of vinyl records without fluid residue
  
• Manufactured in the European Union

Fast, Effective Record Cleaning

The VC-S3 is Pro-Ject’s latest premium vacuum-based record cleaner with new & superior features including a magnetic record clamp, pre-mixed cleaning fluid and a better-protected, more robust motor assembly. Especially great for large batches of records, it works fast & thorough providing improvement in sound quality that’s immediately audible.

Pre-Mixed Wash it 2 Record Cleaning Fluid (100mL)

Vinyl records need dedicated maintenance. Even brand new records benefit from a thorough cleaning as the manufacturing process often leaves residue in the grooves. Dry-cleaning with a static-dissipating carbon fiber record brush is no doubt worthwhile for removing superficial dust, but a wet-cleaning process is a must if you intend to extract the most information possible from your vinyl LPs. Accordingly, a suitable cleaning fluid is paramount. Though fast to dry, alcohol-based cleaning fluids can be abrasive to the finer aspects of the grooves, especially over time. This is why we’ve designed our eco-friendly, alcohol-free record cleaning fluid we call Wash it 2. We dilute the concentrate for you so it’s ready for use, saving you an additional step in the process. It also prevents the accidental use of unsuitable water and/or an unsuitable ratio, reducing the margin of error in the cleaning equation. Simplifying things further still, the VC-S3’s vacuum is mighty, leaving your records spotless in just a rotation or two.

Flagship Vinyl Record Cleaner

We’ve removed the screw-down clamp from this design for the sake of efficiency. The magnetic clamp not only protects the record label from fluid damage, it also speeds up the whole cleaning process. Place your record over the spindle, drop the clamp in place (you’ll feel the magnetic attraction!) and you’re ready for the scrubbing & vacuuming steps. A soft goat hair bristle wet-cleaning record brush is supplied for the initial scrub. The robust, easy-to-use metal arm is mechanically stable and focuses all suction power directly onto the record surface. Paired with a self-adhesive, soft-brushing arm strip, your record grooves are cleaned to perfection leaving only the musical material to be heard. The internal reservoir (2.5L) collects the spent cleaning fluid. Wash it 2 readily evaporates in the reservoir too, meaning the container rarely needs emptying. If/when it does need emptying, a pouring spout is also provided (see user manual).

European Build Quality

The VC-S3 is made in Europe from high quality materials and in sturdy form. With many practical features and excellent mechanical operation, the VC-S3 combines industrial design appeal with an affordable, highly effective path toward pristine sound quality from vinyl records.

Specifications

General

• Weight: 17.6 lbs
• Dimensions: 16.3" x 12.8" x 10.7″
• VC-S3 Full User Manual
• Pro-Ject 2 Year Warranty

Cleaner

• Cleaning speed: 30rpm
• Power connection: 110/120V 60Hz
• Power consumption: 120V/650W

Package Contents

• VC-S3 vinyl cleaner
• Magnetic record clamp
• Handheld goat hair scrubbing brush
• Vacuum arm for 12″ vinyl LPs
• Self-adhesive arm strip (1x attached, 1x spare)
• Strip replacement template
• Wash it 2 record cleaning fluid (100mL)
• IEC Power cable

Get High Fidelity Tube Smoothness, Great Looks, and MM/MC Support with Pro-Ject VC-S3

• Fully discrete, ultra-low noise circuitry for perfect sound reproduction
• Dual mono designed with user replaceable ECC83 tubes
  
• RIAA equalization with passive and active options
• Handmade in Europe

Sound that defies expectations

Tube Box S2 uses fully discrete circuitry – no operational amplifiers here (aka Op-Amps, used in simpler, more affordable designs but with some sacrifice to sound quality). The standard, user-replaceable tubes sound stellar out of the box, though the design opens the gates for sound-shaping via tube rolling should you want to take it a step further.

Tube Box S2’s sonic presentation is full & relaxed with a blossoming midrange more typical of much more expensive designs. The stage welcomes most MM & MC cartridges on the market with a wide range of gain, loading & capacitance settings. The S2 series’ 2-layer aluminum/steel enclosure shields the circuitry from vibration and electromagnetic interference for more music, less noise.

Specifications

General

• Weight: 1 lb
• Dimensions: 5.2" x 4" x 2.9"
• Tube Box S2 Full User Manual
• Pro-Ject 2 Year Warranty

Phonostage

• Tubes: (x2) ECC83 (12AX 7A)
• Input impedance: 10Ω, 100Ω, 1kΩ, 2kΩ A
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367pF, 487pF and 587pF/47kΩ B (Input capacitance is irrelevant for low output MC cartridges)
• Input gain: 40dB,43dB B ; 50dB, 53dB and 60dB, 63dB A
• Noise floor: 80dB (A weighted) at 40dB input gain 75dB (A weighted) at 50 dB and 63dB input gain
• THD: <0.02% at 40dB input gain <0.05% at 50dB and 63dB input gain
• RIAA-equalisation curve accuracy: 20Hz – 20kHz / max. 0.4dB
• Subsonic filter: at 20Hz with 18dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18V/1.000mA DC, suitable for your country’s mains supply
• Power consumption: 470mA DC, <1W in standby
• A: typical for low output MC cartridges
• B: typical for MM cartridges or high output MC

Tube Box DS3 B Is the Latest Evolution of Pro-Ject's European-made Legendary Tube Phono Preamps

• Dual mono balanced tube phono preamplifier
  
• Enhance your analog system with high-end tube sound
• Support for two turntables connected simultaneously with multiple cartridge options
• Eliminate noise with a balanced XLR connection

High-End Tube Sound

Tube Boxes have been an integral part of Pro-Ject's product portfolio for years. The new Tube Box DS3 B adds balanced in/outs to the beloved tube amplification. This precision tube phono preamplifier benefits from outstanding circuit technology from Dr. Sykora and uses ultimate components.

Cartridge Loading Options

You can connect two turntables at the same time & easily set everything on the front plate. Each input setting is stored in memory. Large ranges from 40dB up to 65dB are possible. You can perfectly match it with a wide variety of cartridges and integrate it into the rest of your HiFi system, matching the volume levels accurately to other sources like CD players or streaming devices. Load impedance can be set continuously via potentiometer, a system invented by Pro-Ject Audio Systems. It allows you to seamlessly adjust the impedance during playback and immediately assess the impact of different load options. This is necessary to find just the right load impedance for your cartridge. No other manufacturer implements this feature in this precise and extreme manner.

Balanced Signal Transmission

Connect your turntable either with the 5-pin mini XLR cable or standard XLR cables and profit from a balanced signal transmission. Symmetrical (a.k.a. balanced) transmissions consist of a hot and a cold (+ and -) signal. Both signal chains effectively carry the same musical information. The Tube Box DS3 B can extract the final musical information out of the +/- signals and remove all noise that was potentially added along the transmission. All components including tube output and polypropylene capacitors are audiophile grade and guarantee a breathtaking sound experience.

Key Features

• Balanced XLR, Interference-Free: A balanced connection can extract the final musical information, effectively filtering out any noise from interferences stemming from our noisy, modern homes.
• E88CC Vacuum Tubes: The E88CC tubes perform with low noise and microphonics. Enjoy the detailed low end paired with warm highs.
• Continuous Impedance Loading: Load impedance can be set continuously via potentiometer. It allows you to seamlessly adjust the impedance during playback.
• Made in EU: The new Tube Box DS3 B is carefully designed and handmade with high quality materials in Europe.

Specifications

General

• Weight: 3.44 lbs
• Dimensions: 7.87" × 2.76" × 7.48"
• Tube Box DS3 B User Manual

Phonostage

• Tube assembly: (x2) E88CC / 6922
• Input impedance: stepless 10-1000Ω, fix 47kΩ
• Capacitance: 50 / 150 / 300 / 400 pF
• Gain (+6dB using XLR Out): 40 / 45 / 50 / 55 / 60 / 65 dB
• Output voltage typically: 500 mV/1kHz at 5mV/1kHz (at 40dB)
• SNR: > 87dBV | 'A' weighted
• THD: < 0.03%
• RIAA curve accuracy: +/- 0.5dB/20Hz - 20kHz
• Subsonic filter: at 20Hz with 18dB/octave
• Input: (x1) 5-pin mini XLR | (x1) pair XLR | (x1) pair RCA phono
• Output: (x1) pair RCA | (x1) pair XLR
• Power supply: 18V/1000mA DC
• Power consumption: max 750 mA DC / < 0.5 watt standby

Combine Top of the Line Audiophile Quality with Limited Edition Art Commemorating Pink Floyd's Dark Side of the Moon.

• Unlike many other products which combine function and collectibility, this turntable is built to Pro-Ject's highest audiophile standards, while also featuring incredible art commemorating the landmark album.
• Capture the iconic imagery with a dimmable LED rainbow backlight and prism plinth design made of MDF (28mm thick)

It’s Not ALL Dark

The Dark Side of the Moon album is recognized for its artwork almost as much as the music. It shows an enigmatic prism that reflects beams of light into space. It’s a magical and mystical theme that illustrates the band‘s complex sound pallet. For us, it was a no-brainer to create a turntable based on this concept & image.

The result is an extraordinary turntable unlike any the audio market has seen. With high-quality materials were able to implement the core aspects of the artwork. The plinth is made of MDF- a dense, sturdy, resonance-absorbent material. The stainless steel axle of the heavy aluminum sub platter rotates in a bronze bushing. An AC motor drives the sub-platter & platter with a silicon drive belt.

The low-resonance tonearm is a completely new design. It’s definitively one of the highlights of this turntable. The combination of black aluminum & acrylic parts is an eye-catcher to say the least. The supplied Pick it PRO Special Edition MM phono cartridge delivers the rich sonics you would expect from Dark Side of the Moon turntable. With the addition of the LED-backlit rainbow, the turntable looks even more impressive in low light.

As with all Pro-Ject turntables, The Dark Side of the Moon Turntable is handmade with care in Europe!

Specifications

General

• Weight: 13.2 lbs
• Dimensions: 16" x 19.5" x 5.3"
• Pro-Ject 2 Year Warranty

Turntable

• Speeds: 33/45rpm (electronic speed change)
• Drive Principle: belt drive with electronic speed control
• Platter: 10mm thick tempered glass (includes felt mat)
• Platter bearing: stainless stell axle in brass brushing
• Speed drift: 33: ±0.40%; 45: ± 0.30%
• Wow & flutter: 33: ±0.16%; 45: ± 0.14%
• Tonearm: 8.6″ straight acrylic
• Effective arm length/mass: 8.6″(218.5mm)/6g
• Overhang: 18.5mm
• Power supply: 15V/0.8A DC
• Power consumption: 4W (0W standby mode)
• Cartridge: Pick it PRO Special Edition

In the Box

• Dustcover
• 45rpm adapter
• Felt mat
• Included phono cable: Connect it E 5P-RCA, 1.23m

The T2 W is Pro-Ject's Marriage of Analog Vinyl Playback With Digital Convenience

• UPnP compatible with most network-enabled streaming products (Smart TVs, A/V receivers, streaming loudspeakers, etc.)
• 2.4/5GHz WiFI with 2×2 MIMO, up to 866 mbps (340+ concurrent 24/48 lossless audio streams), manage with Pro-Ject Control App
• Standard compressed and optional lossless streams up to 24bit 48kHz
• Features large stable chassis, Nickel finish counterweight, 9″ one-piece aluminum tonearm, and pre-adjusted Sumiko Rainier cartridge
• High-quality dual-stage split-passive MM phono preamp
• 10mm 3.75 lb zero-resonance glass platter
• Speed control with electronic speed switch, and spring-based anti-skating system

Vinyl Playback with Modern Convention

The T2 W is Pro-Ject's bold and successful undertaking of combining nostalgic, vinyl listening with the modern convenience of wireless digital connectivity. The T2 W turntable is belt-driven with a 9" tonearm, electronic speed control module, and a premium Sumiko MM cartridge. But the magic in the T2 W is its integrated wireless capability that allows for networked streaming of Hi-Fi vinyl bliss, even at lossless 48kHz/24-bit FLAC output. The icing on the digital vinyl cake is the ability to manage it all via 'Pro-Ject's Control' app. Pro-Ject's innovation and approach to quality with the T2 W earned them a seat at EISA's "Best of" table with best Vinyl System Product of 2023-2024.

Stream Vinyl Anywhere

The T2 W builds upon Pro-Ject's highly acclaimed T1 formula while introducing innovative Wi-Fi streaming tech. This feature enables seamless streaming to a wide range of modern network-enabled audio devices like hi-fi streamers, network-enabled A/V receivers and contemporary streaming loudspeakers. The T2 W is multi-room capable, allowing for hundreds of audio streams to multiple receiving devices - you'll be hard-pressed to strain its multi-core CPU or struggle with Wi-Fi bandwidth performance issues.

The latest Wi-Fi, WLAN and 2×2 MIMO standards have been added, and the T2 W can either stream in standard compressed format (most compatible) or in lossless 24bit/48kHz for select high-end streamers. The Pro-Ject Control App offers a fast and intuitive experience with easy BLE functional setup for a simple start.

High-Quality Materials

The elegantly crafted CNC-machined plinth is larger and more massive than its T1 big brother. The T2 W is available in 3 finishes: gloss black, satin white and walnut laminate with no plastic components! Thoughtful design eliminates hollow spaces, preventing unwanted chassis resonance. The T2 W also uses a thicker, heavier glass platter, ensuring a zero-resonance design that effectively eliminates the shortcomings associated with plastic or light-weight steel alternatives. Complementing turntable isolation feet separate the T2 W from ambient vibrations present in the vicinity of your hi-fi system.

Speed Control, Motor & Drive System

The motor-driven belt drives a newly designed sub-platter exclusive to Pro-Ject's T-line. The T2 W features Pro-Ject's well-established, electronically-regulated precision-speed AC motor in contrast to most alternatives relying upon unregulated DC motors with wide speed fluctuations. It also features electronic speed-switching between 33 & 45rpm, resulting in a low-noise, highly-stable drive system for the platter.

New Tonearm & Anti-Skate System

The tonearm on the T2 W has been improved with a longer arm tube. With its 9″ effective length and stiff aluminum construction, this one-piece tonearm also features newly updated low-friction bearings to accommodate the increased length and diameter, leading to absolute accuracy in operation. The design limits unwanted resonance and is a big improvement over other detachable, screw-fastened or glued headshells! The T2 W also includes the latest adjustable spring-based anti-skating mechanism for easier setup and optimal performance of your cartridge.

Premium Built-In Phono Stage

The T2 W has a high-quality dual-stage split-passive MM phono preamp. This is the first time a Pro-Ject turntable has used an integrated phono-preamp of this quality. This is considered to be a necessity in order to maximize performance over Wi-Fi, provide unrivaled audio performance, and maximize longevity. Supplied with a high-value Sumiko Rainier MM cartridge ($149 value), this is a true hi-fi playback system with no design compromises.

Specifications

• Weight: 12.1 lbs
• Dimensions: 21.3" x 11.8 x 16.2″
• Speed: 33, 45/78 (electronic speed change)
• Drive principle: belt-drive
• Platter: 10mm thick, 3.75 lb glass platter w/ felt mat
• Main bearing: Stainless steel & brass
• SN/R: 67dB
• Tonearm: 9″ aluminum (effective length 9.05" | effective mass: 0.335 oz)
• Overhang: .867"
• WLAN standards: 2.4/5GHz, IEEE 802.11a/b/g/n/ac/ax, 2×2 MIMO
• Power Supply: 15V / 800mA DC, universal |  4.5W / < 2W in network standby
• T2 W Setup Guide
• T2 W Full Manual
• T2 W Streaming Guide
• Pro-Ject 2 Year Warranty

In the Box

• Pro-Ject T2 W Turntable
• Sumiko Rainier MM Phone Cartridge
• Power supply
• Dust cover
• Felt mat
• 45rpm adapter
• Phono RCA cable

The T2 Super Phono Plug-n-Play Turntable / Preamp Combo Sensibly Enhances Pro-Ject's Critically Acclaimed T1 Series

• Built-in premium MM phono preamp with high-grade circuitry
• Features large stable chassis, Nickel finish counterweight, 9″ one-piece aluminum tonearm, and pre-adjusted Sumiko Rainier cartridge
• 10mm, 3.75 lb zero-resonance tempered glass platter
• Speed control with electronic speed switch, and spring-based anti-skating system
• Available in gloss black, satin white or walnut laminates, handmade in Europe
• Check out the Pro-Ject T2 standard if you're looking for the model with no built-in preamp

T2 Super Phono: A New Contender

The T2 Super Phono turntable/preamp combination sensibly enhances Pro-Ject's critically acclaimed T1 formula. It introduces new audiophile features and raises the performance bar for its price range! With its user-selectable integrated phono preamp, factory installed Sumiko Rainier cartridge, larger chassis, electronic speed control, and spring-based anti-skating feature, the T2 Super Phono is the perfect fit for the audiophile seeking to bring premium build and sound quality to their cherished vinyl collection.

Top-Quality Materials

The elegantly crafted CNC-machined plinth has been expanded in size to enhance stability & tonearm geometry. Available in 3 striking finishes (gloss black, satin white or Walnut laminate), no plastic is used in its construction! Also free of resonant hollow spaces, it effectively prevents unwanted vibration within the chassis. Compared to the T1, the glass platter is thicker & heavier which ensures a zero-resonance design that eliminates the shortcomings associated with plastic or cheap steel alternatives. Purpose-selected turntable feet effectively isolate the T2 from ambient vibrations in the vicinity of your hi-fi system.

Premium Built-In Phono Stage

The T2 Super Phono implements a high-quality dual-stage split-passive MM phono preamp (first seen in Pro-Ject's critically acclaimed T2 W). The larger plinth makes way for more and better circuitry in the junction box. Pro-Ject has designed a circuit that leaves all other built-in MM phono stages in the dust! Supplied with a high-value Sumiko Rainier MM cartridge ($149 value), this is a true hi-fi playback system with no corners cut. Keep in mind that the circuit can be disengaged with the push of a button should you want to upgrade to a low-output MC cartridge.

Speed Control, Motor & Drive

The T2's motor and drive system remain identical to those found in the T1. The motor drives the flat belt which drives the anti-resonant sub-platter. The sub-platter is mounted to an ultra-precise main bearing comprised of a hardened steel axle in brass bushing (machined to a tolerance of 0.001mm!) Where most alternative products use unregulated DC motors with wide speed fluctuations, the T2 uses an electronically-regulated, precision-speed AC motor. Electronic speed change between 33 and 45rpm is accessible with the rocker switch as well! All told, it's a highly-stable & ultra-low-noise drive system.

Tonearm & Anti-Skating

The T2's tonearm has been improved for better cartridge geometry. Still a one-piece aluminum design, its effective length improves to 9". It adds an updated, low-friction bearing to accommodate the increased length and diameter for absolute accuracy. Aside from clean aesthetics, the integrated headshell is a key player in minimizing arm tube resonance (bonded headshells have adverse effects in terms of resonance). The T2 also features user-friendly spring-based anti-skating for fast and accurate setup. Since the Sumiko Rainier is factory-aligned with the tracking force set, simply turn the wheel to your desired value, and you're done with adjustments.

Sumiko Rainier + Semi-Balanced Cable

The T2 Super Phono includes the acclaimed high-value Sumiko Rainier MM phono cartridge which synergizes beautifully with the built-in phono stage. The cartridge is factory-aligned with the tracking force set!

And like the T1, the T2 Super Phono is topped-off with shielded, semi-symmetrical, low-capacitance phono cables purpose-designed by Pro-Ject for use with turntables. An acrylic dust cover is also included with adjustable hinges for your convenience. Everything you need is in the box and can be assembled in minutes.

Specifications

• Weight: 12.1 lbs
• Dimensions: 21.3" x 11.8 x 16.2″
• Speed: 33, 45 (electronic speed change)
• Speed Variance: 0.6% (33rpm), 0.5% (45rpm)
• Wow & Flutter: 0.19% (33rpm), 0.17% (45rpm)
• Drive principle: Belt-driven sub-platter design
• Platter: 10mm thick, 3.75 lb glass platter w/ felt mat
• Main bearing: Stainless steel spindle in bronze bushing
• SN/R: 67dB
• Tonearm: 9″ one-piece aluminum (effective length 9.05" | effective mass: 0.34 oz)
• Overhang: .867"
• Power Supply: 15V / 800mA DC, universal |  4.5W (0W in standby)
• T2 Setup Guide
• Pro-Ject 2 Year Warranty

In the Box

• Pro-Ject T2 Super Phono Turntable
• Factory-aligned Sumiko Rainier MM Phone Cartridge
• Power supply
• Dust cover
• Felt mat
• 45rpm adapter
• Phono RCA/ground cable

The T2 Audiophile Entry Level Turntable is a Smart Successor to Pro-Ject's T1 Series

• Features large stable chassis, Nickel finish counterweight, 9″ one-piece aluminum tonearm, and pre-adjusted Sumiko Rainier cartridge
• 10mm, 3.75 lb zero-resonance tempered glass platter
• Speed control with electronic speed switch, and spring-based anti-skating system
• Available in gloss black, satin white or walnut laminates, handmade in Europe
• This model has no built-in MM phono preamp - check out the T2 Super Phono if you're looking for built-in preamp

T2: A New Modern Marvel

The new T2 turntable is the anticipated successor to Pro-Ject's critically acclaimed T1 line. It introduces new audiophile features and raises the performance bar for its price range! With its factory installed Sumiko Rainier cartridge, larger chassis, electronic speed control, and spring-based anti-skating feature, the T2 is the perfect fit for the audiophile seeking to bring premium build and sound quality to their beloved vinyl collection.

The T2 does not come with integrated MM phono preamp, so if you already have or are looking to purchase a separate, upgraded preamp for use with the T2, this is a perfect fit! Check out the T2 Super Phono for the version with integrated Pro-Ject MM preamp! However, the T2 does include super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject – not your run-of-the-mill RCA cables.

Highest Quality Materials

The elegantly crafted CNC-machined plinth has been expanded in size to enhance stability and is available in striking finishes such as High Gloss Black, Satin White, or Walnut. It boasts a construction free of plastic components and meticulous manufacturing that eliminates any hollow spaces within, effectively preventing unwanted vibrations within the chassis. Furthermore, the glass platter in the T2 has been made heavier and thicker compared to its predecessor, ensuring a zero-resonance design that effectively eliminates the shortcomings associated with plastic or lightweight steel alternatives. Complementing these improvements, purpose-selected turntable feet effectively isolate the T2 from ambient vibrations present in the vicinity of your hi-fi system.

Speed Control, Motor & Drive

The T2's motor and drive system remain identical to those found in the T1. The motor drives the flat belt which drives the anti-resonant sub-platter. The sub-platter is mounted to an ultra-precise main bearing comprised of a hardened steel axle in brass bushing (machined to a tolerance of 0.001mm!) Where most alternative products use unregulated DC motors with wide speed fluctuations, the T2 uses an electronically-regulated, precision-speed AC motor. Electronic speed change between 33 and 45rpm is accessible with the rocker switch as well! All told, it's a highly-stable & ultra-low-noise drive system.

New Tonearm & Anti-Skating

The T2's tonearm has been improved for better cartridge geometry. Still a one-piece aluminum design, its effective length improves to 9". It adds an updated, low-friction bearing to accommodate the increased length and diameter for absolute accuracy. Aside from clean aesthetics, the integrated headshell is a key player in minimizing arm tube resonance (bonded headshells have adverse effects in terms of resonance). The T2 also features user-friendly spring-based anti-skating for fast and accurate setup. Since the Sumiko Rainier is factory-aligned with the tracking force set, simply turn the wheel to your desired value, and you're done with adjustments.

Sumiko Rainier

The T2 includes the acclaimed high-value Sumiko Rainier MM phono cartridge which synergizes beautifully with the built-in phono stage. The cartridge is factory-aligned with the tracking force set! An acrylic dust cover is also included with adjustable hinges for your convenience.

Specifications

• Weight: 11 lbs
• Dimensions: 21.3" x 11.8 x 16.2″
• Speed: 33, 45 (electronic speed change)
• Speed Variance: 0.6% (33rpm), 0.5% (45rpm)
• Wow & Flutter: 0.19% (33rpm), 0.17% (45rpm)
• Drive principle: Belt-driven sub-platter design
• Platter: 10mm thick, 3.75 lb glass platter w/ felt mat
• Main bearing: Stainless steel / Brass
• SN/R: 67dB
• Tonearm: 9″ one-piece aluminum (effective length 9.05" | effective mass: 0.34 oz)
• Overhang: .867"
• Power Supply: 15V / 800mA DC, universal | 4.5W (0W in standby)
• Pro-Ject 2 Year Warranty

In the Box

• Pro-Ject T2 Turntable
• Factory-aligned Sumiko Rainier MM Phone Cartridge
• Power supply
• Dust cover
• Felt mat
• 45rpm adapter
• Phono RCA/ground cable

A Simple Upgrade for Any Player

Record Puck PRO ensures a firm fit between the record and the turntable platter. Record pucks use mass to secure the record yielding improvements timing, depth & clarity.

Phono Box S2 Ultra is Classic Pro-Ject Design, Upgraded and Refined

• Audiophile performance with polystyrene capacitors
• Switchable input impedance/capacitance
• Four adjustable gain levels
• Precise split RIAA equalization
• Handmade in Europe

Elevating the Fundamentals

Phono Box S2 Ultra uses a fully discrete, Op-Amp-free design that fosters sonics rarely found in this class. On top of omitting Op-Amps, the selected polystyrene capacitors (known among audiophiles as the ‘holy grail’ for phono preamplifiers) significantly contribute to the clean, clear, detail-oriented sonics that S2 Ultra delivers. With wide-ranging flexibility in gain, load & capacitance, it can handle with grace almost any cartridge you throw at it. Split RIAA equalization creates an ultra-accurate representation of the RIAA curve, further refining what you hear. To protect the circuitry from potentially harmful interference, the S2 enclosure features a 2-layer enclosure comprised of aluminum & steel.

Specifications

General

• Weight: 1.25 lbs
• Dimensions: 4.7" x 4.1" x 1.4"
• Pro-Ject 2 Year Warranty

Phonostage

• Input Impedance: 10Ω, 100Ω, 1kΩ, 47kΩ / 100pF
• Input Capacitance/impedance: 100pF, 200pF, 320pF and 420pF */47kΩ B (Input capacitance is irrelevant for low output MC cartridges.)
• Input gain: 40 and 43dB B / 60 and 63dB A
• SNR MM: 85dBV (90dBV – ‘A’ weighted)
• SNR MC: 65dBV (71dBV – ‘A’ weighted)
• THD MM: <0,0005%
• THD MC: < 0,004%
• RIAA-equalisation curve accuracy: <0,4dB / 20Hz – 20kHz
• Subsonic filter: at 20Hz with 18dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18V/500mA DC, suitable for your country’s mains supply
• Power consumption: 18V/80mA DC
• A: typical for low output MC cartridges
• B: typical for MM cartridges or high output MC

Phono Box S2 is Classic Pro-Ject Design, Upgraded and Refined

• Audiophile performance with high-grade amplifications modules and WIMA capacitors
• Dual mono for maximum noise isolation
• Precise RIAA equalization
• Handmade in Europe

Elevating the Fundamentals

Phono Box S2 is the successor to the world-famous Phono Box S, which offered unrivalled sonics and versatility at a price that was unheard-of. S2 is a refinement on that model with an upgraded chassis & circuitry to deliver more micro-detail, improved dynamic-handling, heightened clarity with a soundstage usually found in much more expensive products. Phono Box S2’s housing is an aluminum/steel sandwich construction that is not just sleek aesthetically, but also shields the circuitry from potentially harmful electromagnetic interference and vibration. The bottom DIP panel allows for fine-tuning of electrical parameters with nearly any MM or MC cartridge available.

Specifications

General

• Weight: 1.26 lbs
• Dimensions: 4.5" x 4.1" x 1.4"
• Phone Box S2 Full User Manual
• Pro-Ject 2 Year Warranty

Phonostage

• Input impedance: 10Ω, 100Ω, 1kΩ A
• Input capacitance/impedance: 100pF, 200pF, 320pF and 420pF */47kΩ B (Input capacitance is irrelevant for low output MC cartridges.)
• Input gain: 40 and 43dB B / 60 and 63dB A
• Noise floor MM: 94dB (A weighted) at 40dB and 43dB input gain
• Noise floor MC: 75dB (A weighted) at 60dB and 63dB input gain
• THD MM: <0.01% at 40dB and 43dB input gain
• THD MC: <0.05% at 60dB and 63dB input gain
• RIAA-equalisation curve accuracy: 20Hz – 20kHz / max. 0.4dB
• Subsonic filter: at 20Hz with 12dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18V/500mA DC, suitable for your country’s mains supply
• Power consumption: 85mA DC, <1W in standby
• A: typical for low output MC cartridges
• B: typical for MM cartridges or high output MC

Pro-Ject's Phono Box MM is a High-precision Phono Preamp for Moving Magnet Cartridges

• Features low-noise circuitry and accurate RIAA equalization
• Gold-plated RCA connections for preservation of signal integrity
• European Constructed

High Precision, Low Complexity

Phono Box MM is a high-precision European-built phono preamp specifically for use with moving magnet cartridges. It uses low-noise circuitry and accurate RIAA equalization for a seamless, non-fatiguing playback that’s more convincing than its price suggests. The low-impedance output stage allows for longer cable runs with minimal distortion, and gold-plated RCA ins & outs are used to preserve signal integrity.

Specifications

General

• Weight: 0.28 kg
• Dimensions: 4.2" × 1.2" × 3"
• Pro-Ject Phono Box MM User Manual

Phonostage

• Input capacitance/input impedance, MM: 47Ω/120pF (typical for MM or high output MC cartridges)
• Gain: 40dB
• Output voltage typically: 500mV/1kHz at 5mV/1kHz
• Noise floor: 88dB (A weighted)
• THD: < 0.04%
• RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0.5dB
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18V/500mA DC, suitable for your country's mains supply
• Power consumption: 20mA DC

Pro-Ject Phono Box DC is a Simple Design with a World Class Pedigree

The Pro-Ject Phono Box DC is a classic, versatile sound-first design that is an undeniable bargain. First and foremost, it’s designed to preampflify the phono signal in a clear, low-noise fashion with impressive depth & imaging for a stage in this class. Top-notch circuitry minimizes distortion and heightens RIAA equalization accuracy for gorgeous analog reproduction with MM or MC cartridges. Push-button selection between 40db gain (MM, 47k ohm load) and 60dB (MC, 100ohm load) makes Phono Box DC widely compatible, representing a fantastic introduction to the world of moving coil cartridges.

Specifications

General

• Weight: 0.57 kg
• Dimensions: 11.5 × 10.3 × 3.6 cm

Phonostage

• Input capacitance/input impedance, MC: 100ohms/120pFA
• Input capacitance/input impedance, MM: 47 kohms/120pF B
• Gain, MM / MC: 40dB / 60dB
• Output voltage typically, MM / MC: 300mV at 1 kHz - 3mV (MM Input) / 0,3mV (MC input)
• Max. output: 9.5V (1 kHz)
• Noise floor, MM / MC: 94dB (A weighted) / 75dB (A weighted)
• THD, MM / MC: 0,01 / 0,05%
• RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,5dB
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18V/500mA DC, suitable for your country's mains supply
• Power consumption: 80 mA DC

In Continuation of the Brand’s Proud Tradition of Collaborating with Artists, Pro-Ject Presents Its Special Edition Metallica Artist Series Turntable

• Massive MDF plinth with mirror-finished metal logo contour
• S-shaped tonearm with pre-installed Pick it S2 C cartridge
• Fully adjustable VTA, tracking force, and anti-skating
• Features heavy glass platter, Aluminum sub-platter, and metal drive-pulley
  
• Height-adjustable, TPE damped Aluminum feet
• Precision belt-drive with electronic speed control
• Handmade in Europe

... AND VINYL FOR ALL

Pro-Ject is thrilled to preview the new special-edition Metallica Artist Series Turntable, designed and handmade in Europe. The Metallica team reached out to Pro-Ject and chose them as their partner for a Metallica-themed record player. Pro-Ject Audio Systems is proud to announce this unique work of art, continuing their tradition of artist collaborations.

Master of Vinyl

The deck surface has been treated with a mirror-finished metal logo contour that gives the player its distinctive look. The S-shaped tonearm is fitted with a detachable SME headshell to allow quick cartridge changes. Out of the box, the turntable comes pre-adjusted with Pro-Ject's Pick it S2 C cartridge. Tracking force and anti-skating are both adjustable and make your Metallica Limited Edition Turntable a true audiophile investment.

When you rock vinyl on this deck... Nothing Else Matters.

Heavy Glass Platter

The glass platter is a heavy, zero-resonance design. The high mass of the platter produces the tightest and most accurate playback speeds while allowing you to see the stunning turntable, all of its high-quality parts, and the incredible build quality. All of the the flaws of plastic or lightweight construction are completely avoided here.

Aluminum Sub-Platter, Pulley and Feet

The aluminum sub-platter is usually one of the most sought after upgrades, but it comes standard on the Metallica Limited Edition Turntable! The diamond cut sub-platter and pulley can be machined to much tighter tolerances. The aluminum sub-platter adds more mass to the entire platter and drive system resulting in additional damping of noise and unwanted resonance. The improved tolerances during production increase overall speed accuracy. The additional mass and ultra-precise pulley and sub-platter diameters improve short term speed stability (also called wow & flutter).

The Metallica turntable uses height adjustable heavy-duty metal feet to ensure level positioning on every surface and the feet are TPE-damped for resonance absorption.

Hardwired for Speed Stability

In typical Pro-Ject fashion, speed is precision controlled electronically and guarantees the most accurate and stable speeds. Change between speeds easily with the toggle switch, or with the supplied round belt for 78rpm, you can also listen to your shellac records.

S-Shaped Tonearm

The 8.6“ S-shaped Aluminum tonearm comes with a detachable SME-style headshell. The headshell allows you to swap out cartridges quickly and easily. The tonearm bearing and base are machined entirely from Aluminum. You won‘t find any plastic in these critical parts. The Metallica Limited Edition turntable will track your vinyl records with speed, accuracy and consistency. This is The End of the Line for audiophile turntable design.

Specifications

General

• Weight: 9.9 lbs
• Dimensions: 16.9" x 4.7" x 16.9"
• Metallica Turntable Setup Guide
• Pro-Ject 2 Year Warranty

Turntable

• Speeds: 33, 45, and 78rpm
• Drive Principle: Belt drive with electronic speed control
• Platter: Heavy glass platter
• Platter bearing: Precision stainless steel axle in bronze bushing
• Speed drift: ±0.40% (33rpm) | ±0.30% (45rpm)
• Wow & Flutter: ±0.16% (33rpm) | ± 0.14% (45rpm)
• SNR: 68dB
• Tonearm: 8.6” S-shaped aluminum (SME headshell)
• Effective Arm Length/Mass: 218.5mm/7.5g
• Overhang: 18.5mm
• Included: 15V DC / 0.8A power supply, 78rpm belt, 45rpm adapter, felt mat
• Power Consumption: 4W / 0W standby
• Cartridge: Pick it S2 C integrated cartridge & headshell

In the Box

• Metallica Turntable
• 78rpm belt
• 45rpm adapter
• Felt mat
• Premium semi-symmetrical phono cable with grounding wire
  

Head Box S2 Let's You Keep That Pro-Ject Excellence All to Yourself

• 725mW at 32Ω powers a broad range of headphones via 6.3mm or 3.5mm outputs
• RCA bypass lets you slip it in your stack between the Phono Stage and Power Amp, and easily switch between speakers and headphones.
• Incredible sound performance for the price.
• Handmade in Europe

Simplicity and Power 

When it comes to delivering high-class sound through the output of modern devices such as laptops & smartphones, Head Box S2 is here to help. Many products in its class don’t have enough power to reveal the maximum potential of modern headphones. Head Box S2’s 725mW output power will deliver crisp, clean & musical sonics with sufficient volume for even those who like to crank it. The source of your choosing can be fed to the gold-plated RCA jacks at the rear. On the front are two headphone jacks (1/4″ & 1/8″) that can be used simultaneously for shared listening experiences.

Sound-first components are used throughout so you can rest assured you’re getting the best performance for you dollar. The aluminum/steel enclosure helps to protect the circuitry from electromagnetic interference and vibration, further reducing unwanted noise. Its versatility, power, and sonic performance make Head Box S2 is an absolute audiophile bargain that’s within reach for any listener with a critical ear.

Specifications

General

• Weight: 0.365 kg
• Dimensions: 12 × 10.3 × 3.7 cm

Amp

• Output power: 725mW (into 32Ω)
• Signal to noise ratio: -110dBV
• THD +N: < 0.002%
• Gain: 11dB
• Crosstalk: 68dB
• Frequency response: 20Hz – 80kHz (+- 0.2dB)
• Analogue inputs: 1 pair RCA
• Headphone output: (x1) 6.3mm | (x1) 3.5mm
• Headphone impedance: 8 – 600Ω
• Output impedance: < 1Ω
• Analog loop out: 1 pair RCA
• Power supply: 5V/0.5A DC
• Standby power consumption: <0.5W

Debut PRO B, Pro-Ject's 30 year Anniversary turntable, Blends Precision with Style

• Pre-adjusted Pick it PRO Balanced MM cartridge
• Mini XLR balanced phono output
• One piece carbon/aluminum tonearm and precision aluminum platter
• Handmade in Europe
• 8-coat hand-painted satin black MDF chassis
• 30 year Anniversary turntable

Enhanced + Balanced

Pro-Ject's Debut PRO B enhances the design of the Debut PRO turntable with a balanced mini XLR output and balanced MM phono cartridge (the first of its kind!) For balanced operation, you only need a mini XLR cable to connect the turntable to a Phono Box S3 B, Phono Box DS3 B, or Tube Box DS3 B balanced phono preamp.

Hybrid Armtube

The Debut PRO B features a one-piece armtube precision-machined from Aluminum and wrapped in Carbon Fiber. The Carbon layer increases rigidity while the inner Aluminum tube lends additional mass and damping.

This super-stiff, uniquely-damped tonearm construction ensures meticulously accurate tracking of the record groove.

Pick it PRO Balanced

The Pro-Ject Pick it PRO Balanced cartridge allows for "True Balanced" signal transmission. A revised version of the Pick it PRO, it re-routes the grounding so that it sends a symmetrical signal. The big advantage of a balanced connection is its ability to remove accrued noise and interference from the transmission line.

Additionally, Project's "True Balanced" cable range offers several options for connecting your Debut PRO B to their Phono Box S3 B, Phono Box DS3 B or Tube Box DS3 B phono stages.

Adjustable VTA & Azimuth

Debut PRO B's tonearm allows for adjustment of both azimuth and vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws at the rear of the collar (and re-tightening them when desired height is reached!).

This flexibility gives you the option of adapting the tonearm height should you want to explore various record mats and/or phono cartridges.

Nickel-Plated Aluminum Parts

The nickel finish of the aluminum components results in harder, less resonant surfaces that look great. This process enables us to produce very high-quality and sustainable components. Pro-Ject avoids plastics and similarly "cheap" materials as much as possible.

The precision-CNC-machined components are aesthetically matched, and culminate in Debut PRO B's simple, modern and elegant visual appeal.

Electronic Speed Change & Regulation

Platter speed is controlled electronically with the utmost precision and stability. Easily change between 33 and 45rpm with the toggle switch. With the supplied round belt for 78rpm, you can also enjoy shellac discs.

To prevent motor vibration from reaching the cartridge, Debut PRO B uses the latest motor suspension responsible for excellent decoupling of the motor from the plinth.

TPE-Damped Die-Cast Platter

The die-cast aluminum platter is precision balanced with additional machining after casting. This facilitates perfect platter rotation while playing records.

The heavy aluminum platter also adds TPE a (thermoplastic elastomer) damping ring and corresponding cutout on the underside, muting any resonance created by the metal record platter and contributing to the flywheel effect.

High-Quality RCA/Ground Cables

Cables cannot add any information back to a given signal, rather, they're responsible for allowing as much musical information as possible through to the receiving device. This is why Pro-Ject includes their Connect it Phono E RCA cable. Optimized for phono applications, they've implemented quality metals and careful configuration to ensure lossless signal transmission.

Sophisticated DC/AC Power Generator

Pro-Ject's turntables use switch-mode power supplies for good reason. They take the unrefined AC power from your wall and convert it to DC. That DC power is then fed to DC/AC generator within the turntable, which in turn powers the AC motor.

The advantage is that a completely new sine wave is created by the generator, fully decoupling your turntable from the dirty AC power coming from your outlet. This amounts to steady power being fed to the motor thereby enhancing speed stability.

Two Upgrades in One Box

Clean & stable power is critical for phono setups. The included power supply is a great starting point but you can take it further.

Power Box S3 Phono provides power for the Debut PRO B (15V) as well as your Pro-Ject phono stage (18V). Its two outputs are specifically engineered to power Pro-Ject turntables and phono preamps simultaneously. The sophisticated DC filtration can have a dramatic impact on overall sound quality.

In addition to the sonic improvements, Power Box S3 Phono also offers users a cleaner cable solution (only one wall-wart needed for the PSU).

Specifications

General

• Weight: 13.23 lbs
• Dimensions: 16.34" × 4.45″ x 12.6" (sans cover)
• Debut PRO B User Manual
• Pro-Ject 2 Year Warranty

Turntable

• Speed: 33, 45/(78) (electronic speed change)
• Drive principle: belt-drive w/ electronic speed control
• Platter: 300mm, die-cast aluminum platter with TPE damping and felt mat
• Platter bearing: high-precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0.16% | 45: +/-0.14%
• Speed drift: 33: +/-0.40% | 45: +/-0.50%
• Signal to noise: 68dB
• Tonearm: 8.6” one-piece carbon/aluminum tonearm
• Effective arm length/mass: 218.5mm / 10g
• Overhang: 18.5mm
• Output: XLR / Phono out

Cartridge

• Style: True Balanced moving magnet
• Frequency response: 20-20000 Hz +/-2dB
• Channel separation: 22dB/1kHz
• Output voltage: 4mV
• Recommended load impedance: 47kΩ (MM input)
• Stylus type: Elliptical
• Recommended tracking force: 2.0 g mN
• Weight: 7.2g

In the Box

• 15V DC / 0.8A power supply
• Dustcover
• 78rpm round belt
• 7" single adapter

Debut PRO Brings Professional Precision to the Debut Series

• Debut PRO upgrades the components and design of the Debut series to the next level
• Pre-adjusted Sumiko Rainier cartridge
• One piece carbon/aluminum tonearm and precision aluminum platter
• Handmade in Europe
• Available only in Satin Black finish

Debut PRO Keeps Things PRO-fessional

Pro-Ject Audio Systems have more to add to the Debut series – in fact, let’s call it a ‘statement’, a massive upgrade from our first Pro-Ject Debut Carbon. The relatively recent release of Debut Carbon EVO was beyond successful, but Heinz Lichtenegger’s wheels were still turning. The performance enhancements for EVO were indeed profound, but there was more to strike while the proverbial iron was hot. The ceaseless pursuit for improvement, attention to detail, advancements in research, development, and manufacturing amount to a Debut turntable for the ages.

Our new Debut PRO turntable is a machine that tackles the range of turntables at a retail price $1000 or less. The Debut PRO turntable does so in several meaningful ways.

The Tonearm

Borrowed from the audiophile-grade X1 & X2 turntables, Debut PRO implements the tried and true one-piece carbon-fiber-wrapped aluminum armtube. This heightens rigidity and mass allowing it to more effectively control more massive phono cartridges at this effective arm length. The composite carbon-fiber tonearm is also more effective at damping armtube resonance, allowing the signal to pass through unencumbered. PRO features a sophisticated tonearm bearing block made of nickel-plated aluminum.

Here again, we see an exercise in rigidity while maintaining the ultra-smooth lateral motion of this high-end tonearm. The icing is the tonearm collar, yielding the first Debut model to offer adjustment of vertical tracking angle. Azimuth is also readily adjustable. Listeners can fine-tune the full range of cartridge adjustment parameters to optimize the sound quality of most any phono cartridge.

The Record Platter

With TPE damping for resonance control and die-cast for hi-fi precision, the platter is made of aluminum and adds a ridged slot on the bottom side to cleanly enclose the TPE ring. The surface of the platter is gorgeously satin-ized in a way that hasn’t yet been seen on a Pro-Ject machine. The ridged slot plus the TPE itself adds rotational mass to the platter’s periphery, which reduces wow & fluttering while the platter rotates!

The Fit & Finish of the Debut PRO

The satin black finish uses 8 coats hand-painted over MDF – a classy, high-quality job done in-house at the factory in Europe. The brushed metal trimmings for Debut PRO further reinforce a smooth, elegant aesthetic that’s sure to remain timeless. Sustainably made and free of plastic, the high-precision aluminum bearing block, dust cover, RCA inputs, arm-board & collar, counterweight & anti-skate, height-adjustable metal feet, an isolated power supply and adapter, and toggle switch exude quality both in sight and sound.

It’s paired with the Sumiko Rainier phono cartridge, one of the top performers from the phono cartridge manufacturer.

Pair it with a Phono Box preamp, phono stage, or digital amplifier with the included Connect-It E phono cable to ensure solid and dependable analog playback.

78rpm Records

Debut PRO ships with 2 different drive belts:

• Flat 33 / 45rpm belt (installed on top diameter of the motor pulley)
• Round 78rpm belt

The 78rpm belt is designed for use with the larger/bottom pulley diameter with the differently-shaped slot. Installing the 78rpm belt incorrectly compromises its integrity and can lead to damage.

Additionally, please note that it’s not advisable to play 78rpm records with the Rainier stylus as it will sound poor and cause undue harm to discs or your cartridge. Sumiko has developed a 78 stylus for this very reason - it tracks the grooves properly and reduces the risk of harm to your collection.

Sumiko Stylus Replacement & A Unique Tour of the MM Design

Sumiko Phono Cartridges pair well with Pro-Ject tonearms. Their sonic synergy delivers non-fatiguing music that can be enjoyed for hours with no sacrifice to low-level detail & resolution- the things that make our music reproduction spring to life! Upgrading your stylus is an easy, low-risk path to immediate, audible improvement in your analog experience that only improve with break-in. Cartridge/stylus break-in occurs progressively as you listen. Our listeners notice the greatest degree of improvement in the 20-50 hour range. CLICK HERE to view the video tutorial for replacing and/or upgrading your Sumiko stylus! Also enjoy our gorgeous rendering of a Sumiko moving magnet cartridge in action HERE.

True Balanced – Get Blown Away

Setting us apart from the competition, all Pro-Ject turntables are configured for balanced operation.* Switching to balanced is no subtle upgrade and promises to redefine ‘reference’ sound quality in your turntable system. What’s needed to get there are a) a moving coil cartridge, b) a turntable with balanced phono outputs, c) a phono preamp with balanced phono inputs and d) a balanced cable carrying the phono signal from turntable to phono preamp. Typically a much more costly endeavor, Pro-Ject has changed that landscape by offering products that make the technology attainable to any serious listener.

Debut PRO comes equipped with a balanced RCA/ground phono output and can be run balanced with an RCA > mini XLR phono cable and a balanced phono stage with a mini XLR input (Phono Box S3 B & DS3 B). The turntable ships with an RCA/ground > RCA/ground phono cable for maximum compatibility out of the box (unbalanced dual single-ended RCA/ground is by far the most common connection type in phono). Balanced add-ons are sold separately. Browse options for balanced phono preamps & cables in the reel below!

Specifications

General

• Weight: 13.2 lbs
• Dimensions: 16.6" × 12.6″ x 4.5" (sans cover)
• Debut PRO Setup Guide
• Debut PRO Full User Manual
• Pro-Ject 2 Year Warranty

Turntable

• Speed: 33, 45/(78) (electronic speed change)
• Drive principle: belt-drive w/ electronic speed control
• Platter: 300mm, die-cast aluminum platter with TPE damping and felt mat
• Platter bearing: high-precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0.16%; 45: +/-0.14%
• Speed drift: 33: +/-0.40%; 45: +/-0.50%
• Signal to noise: 68dB
• Tonearm: 8.6” one-piece carbon/aluminum tonearm
• Effective arm length/mass: 218.5mm / 10g
• Overhang: 18.5mm
• Power consumption: 4W / 0W standby

Cartridge

• Sumiko Rainier
• Frequency range: 12-25,000Hz
• Channel separation: 25dB/1kHz
• Output voltage: 5mV
• Recommended load impedance: 47kΩ (MM input)
• Compliance/stylus type: 10µm/mN – elliptical
• Recommended tracking force: 20mN
• Weight: 6.5g

In the Box

• 15V DC / 0.8A power supply
• Dustcover
• 78rpm round belt
• 7‘‘ singles adapter

Experience Unparalleled Value and Quality With the Debut EVO 2, Pro-Ject's Much Anticipated Sequel to Their Most Popular Turntable

• Includes Pick it MM EVO cartridge
• Improved Tonearm Bearing Block and Counterweight
• Streamlined 8.6" one-piece carbon-fiber tonearm with sapphire bearings for greater tracking precision and audio reproduction
  
• Improved, solid 3.75 lb die-cast Aluminum platter w/ TPE damping
• Electronic speed switch, 33 and 45 RPM
• 8-coat hand-painted resonance-resistant MDF chassis
• Manufactured in the European Union

What's New in the EVO 2?

Pro-Ject's improved and updated Debut EVO 2 turntable offers incredible value at its price point and represents a premium choice for the listener looking for a basic vinyl table with an accessible price tag. Debut EVO 2 introduces several enhancements over the original Debut Carbon EVO, aiming to refine performance and listening experience for vinyl enthusiasts:

• Tonearm Bearing and Assembly: The EVO 2 features an improved tonearm bearing block, similar to that of the Debut Pro, designed to minimize friction and enhance tracking accuracy.
  
  
• Platter Upgrade: Replacing the steel platter of the original, the EVO 2 utilizes a die-cast Aluminum platter with a TPE (thermoplastic elastomer) damping ring. This design reduces unwanted resonances and allows for the use of moving coil cartridges without magnetic interference.
  
  
• Cartridge Enhancement: The Debut EVO 2 comes pre-installed with the new Pick It MM EVO moving magnet cartridge, co-designed with Ortofon, optimized for synergy with the tonearm.
  
  
• Chassis and Connectivity: The updated chassis integrates the RCA and power connections into the plinth, offering a sleeker design and easier access compared to the previous model.

Premium Tonearm

The Debut EVO 2 turntable features an 8.6” carbon fiber armtube with a sturdy aluminum bearing block (like Debut PRO), ensuring precise, stable tracking. Its one-piece armtube and headshell design minimize resonance, optimizing cartridge performance for detailed, immersive sound.

Adaptive Anti-Skating Mechanism
As the skating force varies between the inner and outer grooves of a vinyl record, Pro-Ject's anti-skating mechanism adjusts accordingly.

Carbon Fiber Tonearm Tube
Super stiff and light-weight one-piece 8.6" carbon tonearm design.

Massive Low-Friction Bearing
The CNC-milled Aluminum bearing block facilitates very low friction & high rigidity.

TPE-Damped Die-Cast Platter

The 3.75 lbs die-cast Aluminum platter is precision-balanced and features a TPE damping ring to minimize resonance and enhance stability. Upgrading from the previous steel design, the Debut EVO 2 supports moving coil cartridges for improved performance.

Height-Adjustable Damped Feet

The Debut EVO 2 stands on three height-adjustable TPE-damped feet for easy leveling & great isolation. By using 3 feet they are able to increase stability on uneven surfaces while minimizing surface-contact.

Pick it MM EVO Phono Cartridge

The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It compliments the tonearm sonically & aesthetically. Teaming up with Danish cartridge specialists for development, Pro-Ject implemented split-pole pins known for achieving a flat frequency response typically only achievable with moving coil designs.

High-Quality RCA/Ground Cables

Pro-Ject includes the Connect it Phono E RCA cable, designed for optimal phono signal transmission with high-quality materials to minimize loss. The Debut EVO 2 features a balanced-capable RCA/ground phono output, compatible with RCA to mini XLR cables for use with balanced phono stages like the Phono Box DS3 B or Tube Box DS3 B.

Sophisticated DC/AC Generator

Pro-Ject turntables use switch-mode power supplies to convert AC to DC, which is then regenerated into a clean sine wave. This process eliminates power impurities (like dirty AC power), ensuring stable motor performance and improved speed accuracy.

Specifications

General

• Weight: 13 lbs
• Dimensions: 16.3" x 12.6" x 4.5"
• Pro-Ject 2 Year Warranty
• Debut EVO 2 User Manual

Turntable

• Speed: 33, 45
• Drive: belt drive, electronic speed control
• Platter: 12" | 3.75 lb steel
• Platter damping: TPE damping ring + felt mat
• Main bearing: stainless steel, bronze bushing
• Wow & flutter: 33: +/-0.16% | 45: +/-0.14%
• Speed drift: 33: +/-0.40% | 45: +/-0.50%
• SNR: 68dB
• Tonearm: Carbon fiber 1-piece tube
• Effective arm length: 8.6"
• Effective arm mass: 10.0g
• Overhang: 0.73"
• Power: 4W / 0W standby

MM-Cartridge

• Frequency range: 20-20.000Hz
• Channel separation: 22dB/1kHz
• Output voltage: 7mV
• Recommended load impedance: 47kΩ (MM input)
• Compliance/stylus type: 10µm/mN – elliptical
• Recommended tracking force: 18mN
• Weight: 7.2g

In the Box

• Debut EVO 2
• Pick it MM EVO cartridge
• Acrylic dust cover
• Drive belt for 33 1/3 & 45rpm
• Drive belt for 78rpm
• Adapter for 7″ singles
• Connect-It E phono cable w/ ground
• Felt record mat
• 15V DC / 0.8A power supply

Pro-Ject's Debut Carbon EVO is the Sequel that Balances HiFi Heritage and Never Ending Evolution

• 8.6" one-piece carbon-fiber tonearm
  
• Includes Sumiko Rainier phono cartridge, factory mounted and precision aligned
• Electronic speed selection for 33 and 45 RPM (78 RPM capable)
• Solid 3.75 lb stamped steel platter w/ TPE damping
• 8-coat lacquered finish in high gloss colors or real walnut veneer
• Manufactured in the European Union

The Pro-Ject Debut Carbon EVO-lution

The new Debut Carbon EVO represents the epitome of Pro-Ject’s philosophy: high performance, clean aesthetics, and superb value. The elegant, simple aesthetic is unmarred by gimmicks and is a pure, high-performance turntable. Need a phono preamp, Bluetooth / digital connectivity, USB interface, or integrated amp? Pro-Ject has you covered with a wide range of external electronics, optimized for any application.

Good Vibrations

Vinyl playback starts with the cartridge. The new Sumiko Rainier phono cartridge combines superb trackability with uncanny accuracy and clarity without sacrificing smoothness. Factory mounted and aligned on an 8.6″ low-mass carbon fiber tonearm, the Rainier offers a replaceable stylus that can be easily upgraded without the need to replace the cartridge, reset the alignment, or rebalance the arm.

Vibes We Don’t Want to Hear

Motors vibrate, a challenge for any designer to overcome as they negatively affect sound quality. The Debut Carbon EVO features a new motor suspension system made with high-mass composite construction for perfect alignment. Additionally, it has been decoupled from the plinth to reduce vibration and smoothly distribute rotational force. The only vibes we want are in the record grooves.

Watch Your Speed? Nope.

The DCE implements a sophisticated onboard power control circuit that generates a very precise signal to ensure accurate and consistent speed regardless of power supply fluctuation. There’s no need for adjustment, gimmicky lights and sliders, or additional external controllers - just reliable accuracy.

Given the increasing popularity of 9″ and high-quality 45rpm records, electronic speed change has been incorporated on the EVO. The selection switch is cleverly integrated with the power rocker switch under the front left corner.

Luxuriously Aesthetic

The solid MDF plinth is painstakingly layered with 8 coats of paint, available in finishes that look and feel luxurious. The EVO is crafted in traditional high-gloss black, white and red (satin finishes available) along with a real walnut veneer. And the included dust cover reflects a build quality beyond typical entry-level turntables.

Upgrade Your DCEVO Turntable

Most Debut owners are aware of Acryl it: a stylish acrylic platter that elevates the performance of all Debut variants via resonance control. Now you can further upgrade the platter assembly with Pro-Ject’s Debut Alu Sub-Platter: a higher-precision design that adds mass to the drive system, delivering improved speed stability and even more resonance control than Acryl it.

78rpm Records

Debut Carbon EVO ships with 2 different drive belts:

• Flat 33 / 45rpm belt (installed on top diameter of the motor pulley)
• Round 78rpm belt

The 78rpm belt is designed for use with the larger/bottom pulley diameter with the differently-shaped slot. Installing the 78rpm belt incorrectly compromises its integrity and can lead to damage.

Additionally, please note that it’s not advisable to play 78rpm records with the Rainier stylus as it will sound poor and cause undue harm to discs or your cartridge. Sumiko has developed a 78 stylus for this very reason - it tracks the grooves properly and reduces the risk of harm to your collection.

Specifications

General

• Weight: 13 lbs
• Dimensions: 16.3" x 12.6" x 4.5"
• DCE Setup Guide
• DCE Full User Manual
• Pro-Ject 2 Year Warranty

Turntable

• Speed: 33, 45/(78)rpm (electronic speed change)
• Drive: belt drive, electronic speed control
• Platter: 12" | 3.75 lb steel
• Platter damping: TPE damping ring and felt mat
• Main bearing: stainless steel, brass bushing
• Wow & flutter: 33: +/-0.19% | 45: +/-0.17%
• Speed drift: 33: +/-0.6% | 45: +/-0.7%
• SNR: 68dB
• Tonearm: 8.6″ carbon fiber 1-piece tonearm tube
• Effective arm length: 8.6"
• Effective arm mass: 6.0g
• Overhang: 0.73"
• Power: 4W / 0W standby

Sumiko Rainier Cartridge

• Frequency range: 12-25,000Hz
• Channel separation: 25dB/1kHz
• Output voltage: 5mV
• Recommended load impedance: 47kΩ (MM input)
• Compliance/stylus type: 10µm/mN – elliptical
• Recommended tracking force: 20mN
• Weight: 6.5g

In the Box

• Debut Carbon EVO
• Sumiko Rainier cartridge (mounted & aligned)
• Adjustable acrylic dust cover
• Drive belt for 33 1/3 & 45rpm
• Drive belt for 78rpm
• Adapter for 7″ singles
• Connect-It E phono cable w/ ground wire
• Felt record mat
• 15V DC / 0.8A power supply

Simple Effective Turntable Upgrade

The Debut Alu Sub-Platter elevates the performance of all Pro-Ject Debut variants. The diamond-cut aluminum material can be machined to tighter tolerances than the standard material and adds mass to the drive system, resulting in more effective damping of unwanted noise and resonance. The high-precision machining increases overall speed accuracy and improves wow & flutter.

Improve the Isolation and Vibration Dampening of your HiFi System

Audio components can be sensitive to mechanical vibration, which limits their high fidelity performance. To keep vibration from your valuable equipment, Damp it feet are a perfect solution with maximum effect at the lowest possible price. Damp it offer similar characteristics as their superior big brother Absorb it, but without high-class aluminium casing. Designed to be placed underneath bookshelf speakers or the original feet of sensitive equipment like turntables, all disc players, tube amplifiers and other components. Damp it prevents transmission of vibration when positioned on vibrating surfaces like glass, metal or thin wood panels. When Damp it is used for both bookshelf speakers and turntable, you can play up to 30% louder without the risk of acoustical feedback. Surfaces typically are excited by speakers, subwoofers or simply by low frequency emission caused by road traffic and transformers. Speaker cabinets and almost all feet of audio devices, like turntables, amplifiers, disc players are not designed to isolate sufficiently from frequency ranges, that really matter.

Damp it consists of high tech synthetic rubber material, that dampens a wide frequency range from infrasonic to 500 Hz and therefore prevents transmission of structure-born sound effectively. It works like an electronic subsonic filter, but without having their assets and drawbacks. Because of its intelligent and rugged design, it can be used for all bookshelf speakers and any sensitive equipment with 3 or 4 feet and even with high mass units up to 20 kg!

Give Your Vinyl Collection the Audiophile Sound Quality it Deserves on Every Spin with Clean it

• Quickest and easiest choice for anti-static maintenance and cleaning
• Uses thousands of the finest carbon fibers
• Perfect for "dust comet" removal and general maintenance every 15-20 vinyl plays

Keep It Clean

Analog appreciators agree that the Clean It carbon fiber stylus brush is a simple and perfect stylus cleaner tool for your turntable. The stylus brush is the best tool for quick anti-static maintenance and daily cleaning of your needle tip.

Without the need for cleaning fluid, Clean it gently removes dust and debris from your stylus tip with thousands of the finest carbon fibers. The result is a clear and perfect playback.

Combined with regular record cleaning and the use of a record brush, your vinyl records give the audiophile sound quality you demand on every spin. Hi-Fi and turntable stylus alike can benefit from the soft bristles of this stylus brush. Spare the cleaning solution and magic eraser while keeping a dirty stylus from getting in the way of your listening experience.

Record collectors know the value of a great phono cartridge. But stylus care is paramount to ensuring each listening session gives you everything you expect. Stylus debris can destroy the experience of your record player. Even if you’ve used a record cleaner before you drop the tonearm, a fuzzy stylus needle can spoil the experience.

Rather than tampering with sensitive or costly styli by hand, using liquid cleaner, a gel pad, or warm water, the Clean It carbon fiber brush from Pro-Ject clears up the dust you could only see with a magnifying glass.

Eliminate Unwanted Resonance in Record Playback

Vinyl sounds best when unwanted resonances between the record and platter are reduced during playback, requiring a record clamp. The Clamp it from Pro-Ject is engineered to ensure your record stays put while you’re enjoying it.

The Clamp it keeps the surfaces of the record and platter solidly mated. Standard record pucks use weight to achieve this, but have two disadvantages: 1) The added weight can actually induce higher levels of main bearing rumble on lower-cost turntables that typically have less massive bearings, 2) Instead of tightening the records surface to the platter, heavyweight record pucks can cause the opposite: Vinyl will get shaped like a bowl with no contact of the outer edges of the record to the platter. Both scenarios will negatively affect playback.

The Clamp it provides a real solution to the above problems by clamping around the center spindle without adding excessive weight. You can also fine-tune clamping pressure depending on the condition of your warped records and can be installed within seconds. This accessory will not only please your ears, but it’s pleasing to the touch. It’s precision-machined and built to look great on any turntable!

*Note: due to platter + sub-platter vs. spindle height, we’ve determined that Clamp it is not compatible with T1, T1 Phono SB, nor T1 Phono BT.

Pro-Ject's Brush it Vinyl Cleaner is the Simplest Solution for Removing Surface Dust During Playback

• Removes dust particles from LPs, 10" and 7" records by creating an anti-static discharge
• Uses high-quality anti-static carbon fiber bristles
• Elliminate vinyl pops and crackles with ease and prolongs the life of your collection

Quick Effective Record Cleaning

Audiophiles rejoice! This vinyl brush is the simplest record cleaning solution to protect your record collection by eliminating surface dust from the record surface as you play. Our record brush features high-quality anti-static carbon fiber bristles.

During playback, holding these carbon fiber brush bristles over your vinyl record does more than get rid of the build up. This vinyl record brush removes dust particles from LP records, 10-inch, and 7-inch records by creating an anti-static discharge. Static electricity attracts dust to your records meaning that your hi-fi system will pick up pops and crackles as you listen, but a carbon fiber record brush avails you of that issue.

Rather than having to run a microfiber cloth, velvet brush, or wet cleaning solution, this is a quick and easy way to clean records when you plan to listen. Even a typical vinyl record cleaner without an anti-static record brush will leave your records holding a little bit of a static charge.

As you transport them from inner sleeves to your turntable, the stylus could still catch on some conductive material invisible to the naked eye. Even the most careful and dedicated vinyl collector contends with the enemy of household dust and fibers that float in the air and land on a record surface.

Pairing this cleaning brush with a stylus brush creates a more complete record cleaning kit. This record cleaning brush will leave your stylus cleaner and your record player sounding clearer over time. Carbon fiber bristles are the ideal material for a cleaner brush. Accept no substitutes.

Stay in the Groove

The Anti-Skate Weight adds just enough mass to your tonearm to prevent skipping out of the groove on older or heavily worn records.

Simplify Your Player and Improve Your Performance

Upgrade your Debut or 1Xpression turntable to "Esprit“ standards. Acryl it is made from acrylic with a sanitized surface and brings a more liquid sound that leaves no space for platter resonances.

The change is easily made: just exchange your metal platter for Acryl it. Unlike metal platters where a felt mat between record and platter is required to dampen metal resonance, you can put your record directly on the acrylic surface with nothing in between. Acryl it is able to improve overall performance significantly!

Continuing Pro-Ject's Tradition of Collaborating with Artists, the Limited Edition AC/DC Turntable Leaves Nothing to Be Desired With its Stunning Design

• New special 8.6" acrylic tonearm with spring anti-skating
• AC/DC plinth design made of 28mm MDF
• Precision belt-drive with electronic speed control
• Heavy, red 10mm glass platter and precision acrylic sub platter with LED lighting
  
• Features x3 height-adjustable spike feet to decouple the turntable

Let There Be Rock

The legendary rock band AC/DC is known for their electrifying sound and high energy performances. The Australian band became iconic for their rock anthems, including "Back in Black“, "Highway to Hell“ and "Thunderstruck“. Their logo is one of the most recognizable symbols in rock music. The iconic font is reminiscent of a lightning bolt, which gave Pro-Ject the idea of this very special turntable design.

The new AC/DC turntable is engineered for audiophiles and music enthusiasts. The plinth is made of MDF which offers the perfect base. The stainless steel axle of the precision acrylic sub platter sits in a bronze bushing. A design highlight is the red LED lighting of the sub platter. The flat silicon belt builds the connection to the AC motor, which ensures stable speeds.

Heavy Glass Platter

The glass platter is a heavy, zero-resonance design. The high mass of the platter produces the tightest and most accurate playback speeds and at the same time allows you to see the stunning turntable and all of its high-quality parts and incredible build quality - avoiding the flaws of plastic or lightweight construction.

Low Resonance Tonearm

The low resonance tonearm is a complete new design and follows the design idea of the AC/DC logo. The pre-adjusted Ortofon 2M Red cartridge fits the whole concept and delivers you the perfect sound.

Specifications

• Speed: 33, 45 (electronic speed change)
• Drive Principle: Belt drive
• Platter: 10mm glass (felt mat included)
• Platter Bearing: Stainless steel axle in brass bushing
• Wow & Flutter: 33: +/-0,16% | 45: +/-0.14%
• Speed Drift: 33: +/-0.40% | 45: +/-0.30%
• Signal to Noise: 68dB
• Tonearm: 8.6" straight acrylic
• Effective Arm Length/Mass: 218.5mm / 6.0g
• Overhang: 18.5mm
• Power Consumption: 4W / 0W standby
• Dimensions: 19.5" x 15.9" x 5.3" (495 x 405 x 135mm)
• Weight: 13.2 lbs (6 kg)

In the Box

• Pro-Ject AC/DC Limited Edition Turntable
• AC/DC turntable setup guide
• 15V DC / 0.8A power supply
• 7" Single adapter

Pro-Ject A2 Provides an Upgraded and Premium Automatic Turntable Experience

• Sumiko Rainier phono cartridge preinstalled and aligned
• Ultra-low friction 4-point cardanic aluminum tonearm bearing
• Precision-mechanics with automated start & stop
• Features carbon-fiber-reinforced anti-magnetic headshell and damped aluminum platter to reduce wow & flutter
  

The Technology

The A2 perpetuates the success of Pro-Ject's A1 record player, building on the range of mechanical, fully automatic turntables. The A2 allows you to select the lateral location where the tonearm drops to the record groove. Make this selection with the dial for 7″ records (45rpm singles) or 12″ (33 or 45rpm vinyl records.) For additional flexibility, 78rpm has been added to the speed selector dial, allowing you to dust off your collection of old 10″ shellac records (please manually position the tonearm for 10″ 78s, then use the dampened cueing lever.)

NOTE: Remember that 78s have unusual groove width and are made of different materials than most other discs. We recommend Sumiko’s RS 78 stylus for use with the highly adept Sumiko Rainier moving magnet phono cartridge (it’s mounted & aligned at the factory!)

To enjoy listening to your A2 turntable, just flip the ‘Start’ switch. The tonearm will automatically move to the lead-in groove of the selected record size. Once playing, the automatic tonearm functions are entirely disengaged until the arm reaches the lead-out groove. At the lead-out groove, the tonearm will automatically lift and return to the arm rest and the turntable will shut down. Because the automatic functions are entirely mechanical, they bear no influence over sound quality during playback!

Improved Tonearm & Gimbal Bearing

The A2 automatic record player features an ultra-low-mass 8.3″ aluminum tonearm. An arm tube with a larger diameter is used to accommodate more cartridges. The A2 is proudly supplied with a Sumiko Rainier ($149 value) which positions you to upgrade to Olympia, Moonstone or Wellfleet with a simple swap of the stylus.

The suspended sub-chassis design yields a fast response loaded with transient detail and alluring micro-dynamics, while the Sumiko Rainier lends its warmth & smoothness- a match made in heaven. The tonearm bearing features a 4-pinpoint gimbal with steel-tip ball bearings made in-house by Pro-Ject. This design yields the lowest amount of friction possible and A2 will trace your record grooves with the utmost precision.

Heavy MDF Plinth, Floating Sub-Chassis

The heavy MDF plinth is carefully hand-painted in a luxurious 8-coat matte black finish. Its mass greatly reduces unwanted resonance and isolates it from external vibration. The A2 then employs a system wherein the tonearm, platter bearing and motor are affixed to a separate, floating sub-chassis. This isolates the most critical components from external noise, resonance & interference. This can be especially advantageous when, for example, your loudspeakers are near your turntable in proximity.

Massless Tracking Force Adjustment

Damping the counterweight makes the tonearm as a whole more robust. It also decouples the counterweight from the tonearm which reduces resonant frequencies. Tracking force is set by adjusting a precision spring (as from the wristwatch industry!) affixed to the tonearm bearing. This keeps the center of gravity directly above the bearing center.

Why a Suspended Sub-Chassis Design?

The automatic mechanism is sizable and comprised of many parts. Thusly it requires a substantial cutout from the main plinth. Enclosed hollow spaces in turntables are cavernous propagators of vibration & resonance. By employing a suspended sub-chassis, we decouple the tonearm, cartridge and drive mechanism from the solid, high-mass main chassis, eliminating hollow spaces and their adverse effects on sound quality.

Handmade in Germany

A2’s automatic mechanism is fully handmade in Germany and builds on decades worth of experience in the manufacturing of turntables. Upwards of 98% of it’s parts & components are made and produced in Germany (either within the factory or in its immediate vicinity). The main chassis is designed & made in Austria and assembly takes place in Germany.

Specifications

General

• Weight: 16 lbs
• Dimensions: 16.9" x 5.9" x 4.37"
• A2 Setup Guide
• Pro-Ject 2 Year Warranty

Turntable

• Speed: 33, 45, 78 (elec. speed change)
• Drive principle: belt drive, fully automatic
• Platter: damped die-cast aluminum
• Wow & flutter: 33: +/-0.14%; 45: +/-0.12%
• Speed drift: 33: +/-0.27%; 45: +/-0.22%
• Signal to noise: 74dB
• Tonearm: ultra-light-mass 8.3” aluminum tonearm
• Effective arm length: 211mm
• Overhang: 19.5mm
• Power consumption: 1.5W

In the Box

• 15V DC / 0.8A power supply
• Dust cover
• 7″ single adapter
• Felt mat
• Premium semi-symmetrical Connect it E phono cable